Schedule

Plenary Speakers

November 3,Fifth Conference Room of International Conference Center, Northwestern Polytechnical University

Session   I

Session   Chair: Prof. Jihong  Zhu, Northwestern Polytechnical University

9:00-9:10

Welcome

Prof.   Weihong Zhang,   Northwestern Polytechnical University

9:10-9:40

Textile   composite forming   simulations. Specific 3D and shell approaches

Prof.   Philippe Boisse, Institut   National des Sciences Appliquées de Lyon, France

9:40-10:10

Optimal Design for Structures Achieved by Additive Manufacturing

Prof.   Weihong Zhang,   Northwestern Polytechnical University

10:10-10:50

Group   photo, Coffee break

Session   II

Session   Chair: Prof. Zhan Kang,   Dalian University of Technology

10:50-11:20

 “KhAI” achievements in composite structures   design and   manufacturing

Prof.   Maryna Shevtsova,   National Aerospace University, Ukraine

11:20-11:50

Design   of Multiscale Structures   Based on Architectured Materials

Prof.   Shutian Liu, Dalian   University of Technology

11:50-14:00

Lunch   (Banquet in the 2nd floor of Zhenghe Restaurant)

Session   III

Session   Chair: Prof. Jianjun Jiang, Northwestern Polytechnical University

14:00-14:30

Topology   optimization of   multi-material structures - manufacturability, interfacial   strength   and robustness

Prof.   Zhan Kang, Dalian   University of Technology

14:30-15:00

Mechanical   behavior and high   quality assembly method of large composite components

Prof.   Liping Jiang, National   Engineering and Research Center for Commercial   Aircraft Manufacturing

15:00-15:30

Processing   and assembly   technology for aerospace composite component

Prof.   Lanzhu Li, Aerospace   Research Institute of Materials & Processing   Technology

15:30-15:50

Coffee   break

Session   IV

Session   Chair: Senior   Researcher Rupeng Li, National Engineering and Research Center   for   Commercial Aircraft Manufacturing

15:50-16:20

Characterization   and Evaluation   of the manufacturing process for advanced composite materials

Prof.   Jun Liang, Beijing   Institute of Technology

16:20-16:50

Design   and Experiment of Fabric   Rubber Composite Seal In Aircraft

Prof.   Xuefeng Yao, Tsinghua   University

16:50-17:20

Optimizing   the Dynamic   Properties of Composites Through Microstructure Design

Prof.   Xiaoding Wei, Peking   University

 

M1:Mechanics and Design of Composite Structure

November 4,First Conference Room of International Conference Center, Northwestern Polytechnical University

Session   I

Session   Chair: Prof. Yingjie   Xu, Northwestern Polytechnical University

9:00-9:30

Optimization design for smart morphing composite structures

Prof.   Jihong Zhu, Northwestern   Polytechnical University

9:30-10:00

An   Integrated Framework of   Exact Modeling, Isogeometric Analysis and   Gradient-based Optimization   for Variable-Stiffness Panels

Associate   Prof. Peng Hao,   Dalian University of Technology

10:00-10:30

Topology   Design of Composite   Structures for Fracture Resistance with Phase Field Fracturing   Simulation

Associate   Prof. Liang Xia,   Huazhong University of Science and Techonlogy

10:30-10:50

Coffee   break

Session   II

Session   Chair: Associate Prof.   Liang Xia, Huazhong University of Science and   Techonlogy

10:50-11:20

Delamination   propagation in   laminated composite structures: Experimental observations and     numerical modeling

Associate   Prof. Mohammad   Heidari-Rarani, University of Isfahan, Iran

11:20-11:50

Equivalent mechanical analysis and experiments of composite Kagome honeycomb panels manufactured by a novel medular mold

Associate   Prof. Bin Liu, Dalian   University of Technology

12:00-14:00

Lunch   (Banquet on the 2nd floor   of Zhenghe Restaurant)

Session   III

Session   Chair: Assistant Prof.   Yujun Li, Northwestern Polytechnical University

14:00-14:30

Optimization   of processing   parameters to improve the mechanical performance of transparent     polymer product

Prof.   Yingjie Xu, Northwestern   Polytechnical University

14:30-15:00

Graded   negative Poisson’s ratio honeycomb   structure design and application

Associate   Prof. Guodong Fang,   Harbin Institute of Technology

15:00-15:30

Theoretical   analysis and test   on buckling of sandwich structures

Prof.   Zhen Wu, Northwestern   Polytechnical University

15:30-15:50

Coffee   break

Session   IV

Session   Chair: Associate Prof.   Guodong Fang, Harbin Institute of Technology

15:50-16:20

Constitutive   model of cellulose   fiber networks and its application in the textile forming   simulation

Assistant   Prof. Yujun Li,   Northwestern Polytechnical University

16:20-16:50

Strength   analysis technology   for composite structures with large thickness

Senior   Researcher Liyong Jia,   Xushunshou Innovation Center, FAI, AVIC

16:50-17:20

Prediction of mechanical properties of carbon fiber based on cross-scale FEM and machine learning

Associate   Prof. Zhenchao Qi,   Nanjing University of Aeronautics and Astronautics

17:20-17:50

Stacking   sequence optimization   for maximum fundamental frequency of composite   laminates using   sequential permutation search algorithm

Postdoc   Zhao Jing, Huazhong   University of Science and Techonlogy

 

M2 Advanced Manufacturing Technology of Composite Structure
November 4,First Conference Room in School of Mechanical Engineering, Northwestern Polytechnical University

Session   I

Session   Chair: Associate Prof.   Hui Cheng, Northwestern Polytechnical University

9:00-9:30

Robotic   Intelligent Drilling   and Riveting Technology and its Applications in   Aeronautics and   Astronautics

Prof.   Wei Tian, Nanjing   University of Aeronautics and Astronautics

9:30-10:00

High-efficiency   and precision   processing technologies for aerospace advanced composite   materials

Associate   Prof. Zhigang Dong,   Dalian University of Technology

10:00-10:30

Multi-scale   multi-physics   modeling of additive manufacturing

Associate   Prof. Wentao Yan,   National University of Singapore, Singapore

10:30-10:50

Coffee   break

Session   II

Session   Chair: Associate Prof.   Wentao Yan, National University of Singapore

10:50-11:20

The   optimization of the curing   process of composites

Associate   Prof. Vambol Oleksii,   National Aerospace University, Ukraine

11:20-11:50

Quality   Issues in Deep Drilling   of Layered CFRP-Metal Structures

Senior   Researcher Rüdiger Rentsch,   Bremen University, Germany

12:00-14:00

Lunch   (Banquet on the 2nd floor   of Zhenghe Restaurant)

Session   III

Session   Chair: Associate Prof.   Yanli He, Northwestern Polytechnical University

14:00-14:30

Research on Manufacturing Process of Long Flange Composite Parts

Senior Engineer Yong Cheng, Chengdu Aircraft Industrial (Group) Co., Ltd.

14:30-15:00

Influence of fiber macro/micro structure on the bonding property between resin and fiber

Prof.   Jianjun Jiang,   Northwestern Polytechnical University

15:00-15:30

Integrated     preforming-performance simulation model for the cured woven composites     accounting for the influence of yarn angle

Postdoc   Biao Liang,   Northwestern University, USA

15:30-15:50

Coffee   break

Session   IV

Session   Chair: Postdoc Biao   Liang, Northwestern University, USA

15:50-16:20

Cutting   Force Prediction in   Milling CFRPs with Complex Cutter Geometries

Associate   Prof. Yanli He,   Northwestern Polytechnical University

16:20-16:50

Analysis of drilling CFRP technology in aircraft manufacturing industry

Dr. Ende Ge, National   Engineering and Research Center for Commercial Aircraft   Manufacturing

16:50-17:20

Low cost composite technology and key issues for rail trainsit applications

Dr.  Chaozhong Chen,   CRRC

17:20-17:50

Damage mechanism analysis and service performance prediction on the composite interference-fit structure

Associate Prof. Hui Cheng,  Northwestern Polytechnical University

00
DAYS
00
HOURS
00
MINUTES
00
SECONDS

Important Dates

Conference Date:
Nov. 2-4, 2018

Contact Us

Yingjie XU
MOBILE: +86-15229387275
EMAIL: xu.yingjie@nwpu.edu.cn
Hui CHENG
MOBILE: +86-13991303560
EMAIL: chenghui@nwpu.edu.cn
Yujun LI
MOBILE: +86-13161965158
EMAIL: li.yujun@nwpu.edu.cn